-
- Emulsifier E1000 series (ten heterogeneous alcohol ethoxylates)
- Emulsifier E1300 Series (isomeric tridecanol ethoxylates)
- Emulsifier AEO (MOA) Series (C2-14 fatty alcohol ethoxylates)
- O emulsifier series (C16-18 fatty alcohol ethoxylates)
- Oil alcohol ethoxylates 1602/1605
- Propylene glycol phenyl ether (BG-PPH)
- Ethylene glycol phenyl ether (BG-EPH)
- Cashew phenol ethoxylates BGF series
- Ten heterogeneous alcohol polyoxyethylene ether phosphate BG-1006P
- Cashew phenol ethoxylates BGF series
Component: JS-B306 is a polyether modified polydimethylsiloxane solution JS-B310 is a polyester modified polydimethylsiloxane solution
Properties and Uses:
Name | Appearance | Density (25°C) g/cm3 | Refractive index (25°C) | Flash point | Solvent |
JS-B306 | Pale yellow transparent liquid | 0.913 | 1.3565 | ≥25 | Xylene/ethylene glycol phenyl ether |
JS-B310 | Pale yellow transparent liquid | 0.928 | 1.4587 | ≥25 | Xylene/mixed ester |
JS-B306 series high efficiency silicone additive for wetting demanding substrates, effectively improve the performance of dust and mist particles tolerance, particularly suitable for coating vertical surfaces thicker coating leveling. At the same time, it can reduce the sensitivity of the influence of wood and furniture coatings on substrates of air flow, enhancing the directional performance matting agent.
JS-B310-based heat-resistant silicone additive, unlike conventional silicone additives, at 150°C -230°C between no thermal decomposition. When recoating baking systems, no loss of adhesion and defects occur. Used in coil coatings, can effectively migrate to the back of the silicone membrane.
Scope: the JS-B306 are common to all solvent-based coatings, particularly (alkyd, acrylic, polyester) amino paint, epoxy floor paint, UV light-cured paint. JS-B310 is suitable for coil coatings, electrical and metal coatings, can coatings, industrial paint category.
Dosage:
the JS-B306 dosage formulation according to the total amount of 0.1-1%, can be added at any stage in the production process.
JS-B310 dosage formulation according to the total amount of 0.1-1%, can be added at any stage in the production process.